Products >Grape Specialty Equipment >Multi-row Hydraulically driven fans

  Add to Favorites Print Page
Multi-row Hydraulically driven fans Grape Specialty Equipment
Turbo Mist

1-800-495-6145
 
Frame 8 1/2 inch x 2 inch tube frames with urethane paint finish
Tires Tandem 9.5l x 15SL
Tank 300 to 600 US gallons 304 stainless steel construction
Drive Hydraulic power pack
Driveline Weasler pto to 3pt hitch ez turn hitch
Pump Udor RO160 43 gpm 284 psi max
Regulator IP - remote cable adjust available
Controls electric valves
Spray Booms Sardi 500mm heads (4-12 )
Horsepower Required 35-40 PTO HP
Boom: Electric over Hydraulic joystick controlled. Each boom independent
Air control: Fan speed can be adjusted from tractor seat
Rows of coverage: One to three rows.
Agitation: Hydraulically driven mechanical agitation is standard on these units
 

MULTI- ROW GRAPE SPRAYERS

Turbomist build two and three row grape sprayers that utilize hydraulically driven fans to produce the air. The customer will design this unit to his needs, using either 4 or 8 fans in the two row configuration or 6 or 12 fans in the 3 row configuration.

The fans are hooked in series and Turbomist prefers to utilize a 40 gallon oil reservoir on a 3t hitch, which also contains the pump, a Udor Ro160. The unit is a closed loop system, that is no tractor oil is utilized, nor are any tractor hydraulics.

The hydraulic fan multirow units have an electric over hydraulic system and joysticks to manouver the booms, the further you push the joystick, the faster they raise or fold or both.

The booms are designed to be adjustable for different row widths, the speed of the fans can be controlled from the tractor seat and because of the large volume of air right at the target, it is comman to spray at 5-6 mph allowing one machine to cover a 100 acres in a long day.

The advantages to thsi system include:

- Excellent coverage due to small water droplets utilizing visiflow teejet TK-vk color coded ceramic tip nozzles. Typical volumes sprayed are 25 to 50 gpa.

-High speed of travel due to improved coverage

-Reduced drift due to close proximity to the target

-Low horsepower tractor needed (35-40hp) means low fuel consumption

- Unit setup to operate at 450 RPM PTO to give fan speed required by save fuel

-Lower labor costs, one machine with one tractor and driver will replace 3 tractors and 3 drivers for a three row machine.

-Flexibility of both high and low volumes, this unit can spray from 25 gpa to 400 gpa as required.

 

 

 

 
 
AVAILABLE OPTIONS
 


Hydraulic Fan Options
Details



Drain extension to outside of frame
Details



Right side opening Turbomist tank lid
Details



Final Filters- boom mounted
Details



3 Inch nurse tank nipple (Ditch filler)
Details



Lights
Details



Diaphragm pump- High pressure Beta 150
Details



Diaphragm pump - Comet IDS1400
Details



STANDARD FEATURES MUTLIROW SPRAYER
Details

 
 
 
  Add to Favorites Print Page